Nano Ceramic Tint Tiers Explained: Premium vs Ceramic Plus vs Ceramic Ultimate Plus
Every Polar Tint Spring Valley Ranch automotive install starts with the same choice: Premium Ceramic, Ceramic Plus, or Ceramic Ultimate Plus. All three are non-metallic Nano Ceramic film with 99% UV rejection and the Lifetime Polar Tint Promise — the difference is how much infrared heat each one rejects. This guide breaks down the real specs so you know which tier fits your vehicle before you call.
Quick answer
Premium Ceramic rejects up to 46% IR, Ceramic Plus rejects up to 80% IR, and Ceramic Ultimate Plus rejects up to 98% IR — all three block 99% UV and carry the same Lifetime Polar Tint Promise. Premium Ceramic is the accessible entry point, Ceramic Plus is the everyday desert-commute pick, and Ceramic Ultimate Plus is the flagship for vehicles that sit in full sun all day or carry a lot of glass area. Darkness (VLT) is chosen separately from tier — see the table below.
Compare the three tiers side by side
| Tier | IR rejection | UV rejection | VLT options | Warranty |
|---|---|---|---|---|
| Premium Ceramic (Good) | Up to 46% | 99% | 5%, 15%, 35%, 50% | Lifetime |
| Ceramic Plus (Better) | Up to 80% | 99% | 5%, 15%, 35%, 50%, 70% | Lifetime |
| Ceramic Ultimate Plus (Best) | Up to 98% | 99% | 5%, 15%, 35%, 50%, 70% | Lifetime |
All three tiers are fully non-metallic, so none of them interfere with cell signal, GPS, satellite radio, garage remotes, toll transponders, or tire-pressure sensors. See the full automotive window tint page for the complete FAQ and Nevada-legal VLT guidance.
How to choose your Nano Ceramic tier
The tier decision comes down to three things: where your vehicle parks, how much sun your daily commute puts on the glass, and how much heat performance you want to pay for. Here's how the three tiers sort out in practice.
Choose Premium Ceramic if…
- Your vehicle usually parks in a garage, carport, or covered lot
- You want real non-metallic ceramic performance — full UV protection, no purple fade, no signal interference — at the most accessible tier
- Your daily commute is short or mostly shaded
Choose Ceramic Plus if…
- Your car sits in an open lot at work, school, or the airport for most of the day
- You do a regular southwest Las Vegas commute — I-15, the 215 Beltway, Spring Mountain Rd, or Valley View Blvd — with direct sun on the glass
- You want a noticeable step up in cabin comfort over Premium Ceramic without going to the flagship tier
Choose Ceramic Ultimate Plus if…
- Your vehicle has a lot of glass area — a panoramic roof, a large rear window, or a truck/SUV cabin — that takes more of the heat load
- Your car sits outside all day in full Mojave sun with no covered parking at all
- You want the maximum heat rejection Polar Tint installs, full stop
IR, UV, and VLT — what the numbers actually mean
IR rejection is the share of infrared heat — the wavelength you feel as warmth on your skin — that the film blocks at the glass; this is the number that changes by tier (46% / 80% / 98%). UV rejection is ultraviolet light blocked, fixed at 99% across every Polar Tint tier, protecting your skin and your interior from sun damage regardless of which tier you pick. VLT (Visible Light Transmission) is how dark the film looks and is chosen independently of tier — every tier is available across most of the same VLT range. For the deeper breakdown of IR vs. UV vs. TSER (Total Solar Energy Rejected), see the heat-science explainer on the automotive page.
EVs, fleets, and mixed glass
Tesla, Rivian, and Lucid owners run the same three tiers — see the Spring Valley EV tint guide for vehicle-specific notes on panoramic roofs and non-metallic-only rules for signal-dependent EVs. For work trucks and vans, the fleet section of the automotive window tint page covers running a whole fleet at one consistent tier and VLT. Deciding between ceramic tint and paint protection film first? The ceramic vs. PPF order-of-operations guide covers that separate decision.
Already know your tier?
Bring in your vehicle and your pick — or let a certified installer help you decide at the free quote. See what actually happens in the bay on the window tint installation process page, or if you're stripping old, bubbled, or purple film first, see the window tint removal process page. Ready to book? Visit the Spring Valley automotive tint page or call the shop directly.
Nano Ceramic tint tiers — FAQs
What's the real difference between Premium Ceramic, Ceramic Plus, and Ceramic Ultimate Plus?
Does a higher tier mean darker tint?
Which tier should I pick if my car sits outside in full sun all day?
Is Ceramic Ultimate Plus worth it over Ceramic Plus?
Do all three tiers carry the same warranty?
Can I compare tiers in person before I decide?
Ready to pick your tier?
Call (702) 475-6748 or request a free estimate online.